Passer au contenu de la page Passer à la navigation Passer au pied de page
POLARIS POWER GENERATORS

CENTRE D'AIDE

2020-03-19
VIDEO: P3200iE Orientation

features and componentsfeatures and components

 Item   Name  Description
1  Fuel Gauge   Provides indication of fuel level.
2  Control Panel 

 Contains the switches, buttons, indicator panel and receptacles for proper operation of the generator.

 More information is in the table below. 

3  Air Intake   Provides air to cool the engine. 
4  Fuel Tank Cap   Provides access to the fuel tank.
5  Starter Grip 

 Causes the recoil starter to crank the engine when pulled.

 Use as a secondary engine starter if the battery does not contain adequate charge to operate the starter motor. 

6  Engine Oil Service Door   Provides access to the oil tank and dipstick.
7  Folding Handle   Allows for easier carrying and transport.
8  Rear Handle   Use in combination with wheels to pull the generator across a flat surface.
9  Air Exhaust   Dispels exhaust air from cooling the engine.
10  Muffler 

 Reduces noise and emissions from engine combustion. 

 The spark arrestor is located on the end of the muffler.

11  Cord Hooks   Allows for storage of extension cords when the generator is not in use.
12  Maintenance Cover   Provides access to the inner components for routine maintenance and repair.
13  Wheels   Use in combination with the rear handle to pull the generator across a flat surface. 

control panelcontrol panel

 Item   Name  Description
1  Engine Ignition Switch 

 Press up to the ON position to start the engine.

 The switch will automatically default to the RUN position in the center.

 Press down to the OFF position to stop the engine. 

2  Choke Lever
 (if equipped) 
 Pulling the choke lever provides the proper fuel-starting mixture when the engine is cold. Pull the choke lever outward when attempting to start a cold engine. Slowly return the choke to the open position as the engine warms. 
3  SMART Throttle Switch 

 Press the SMART throttle switch to the ON position to automatically reduce engine speed when loads are shut off or disconnected. The engine will return to the proper speed when appliances are in use or reconnected. 

 Press the SMART throttle switch to the OFF position to reduce voltage changes when high electrical loads are simultaneously connected or when using the DC output. 

4  Fuel Valve Switch 

 The fuel valve switch controls the fuel valve. Turn left to the ON position to allow the engine to operate. 

 Turn right to the OFF position while the engine is well-cooled and not in use to reduce the possibility of fuel leakage. 

5  Parallel Socket   The parallel socket can be used to connect two Polaris parallel-ready generators to increase the total power available to a load. Instructions can be found in your Owner's Manual or the Parallel Operation article.
6  Overload Reset Button   The overload reset button is used in case of sudden engine shutdown resulting from prolonged engine overload. Instructions can be found in your Owner's Manual or the article on Overloading Your Generator.
7  Indicator Panel   The indicator panel contains indicators for low oil, fault/overload and output. 
8  Circuit Breakers   The circuit breakers automatically switch OFF if a short circuit or significant overload occurs to one or more of the receptacles.
9  DC Receptacle   The DC receptacle charges 12V DC automotive-type batteries. 
10  AC Receptacles   The AC receptacles provide two connections for properly rated AC appliances. 
11  USB Receptacles   The USB receptacles provide a total of 3.1A data transfer speed available at 5 volts. 
12  120V AC Twist Lock Receptacle   The 120V AC receptacle provides a connection for properly rated 120V AC appliances. 
13  Ground Terminal   The ground terminal connects to the frame of the generator, metal parts that do not conduct current and ground terminals of each receptacle. 

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement parts, use the online parts catalog.

Mots-clés location , component , feature , controls , 3200